Exceeds the manufacturing requirements of AS/NZS 3780 and AS/NZS1940.. 2017 version, which states that all materials must withstand 850 deg C.
All steel is 1.2mm thick including both skins ( with a 40mm air cavity like a thermos) to contain an explosion (No external venting required but there is provision for venting if required )
Totally seam welded construction, ( no pop rivets as Pop rivets can fail at 350 deg c and completely melt at 660 Deg C.)
150mm high water tight bund for any spillage.
Continuous hinge on doors
Sequentially closing double doors. ( The LH door will always close before the RH door ensuring there can not be any gaps for potential fumes to escape when the doors are shut )
Very robust internal door closers.
Galvanised steel shelves with an 8mm thick Polypropylene Bund on each shelf to ensure separation, should one substance leak, it is contained and is not likely to contaminate product on lower shelves.
Adjustable shelf positions with 70mm increments.
3 position door catches , top, bottom and side
Flush mounted key lock door catch with 2 keys per cabinet and extra security position for a pad lock.
Jagbe formulated powder coat system to ensure the longevity of the applied exterior powder coat with UV protection . (Cheap porous interior powder looks the same for a while but is porous and will allow moisture through until ugly rust shows through )
Class 8 labels already fitted
4 adjustable levelling feet and location brackets with fixings
High Vis Vest and Chemical resistant gloves included.